12.

4. 4

10. 10

3. 3

9. 9

11. 11

7. 7

8. 8 Wiring for standard Hydrawise 0.75" (20mm) or 1" (25mm) flow meters is as follows: Flow Meter Wire Label on Controller Blue SEN-1, SEN-2 White SEN COM Red Not connected Wiring for open/closed contact sensors is as follows: Sensor Wire Label on Controller Normally Open / Normally Closed wire SEN-1, SEN-2 Second (common) wire SEN COM

5. 5 Note: The indoor Pro-HC is not water or weather resistant, and must be installed indoors or in a protected area. This device is not intended for use by young children. Never let children play with this device.

1. hunterindustries.com Quick Start Guide Hy dr a wi se ™ Ready

2. 2 Installation 3 Connecting AC Power 5 Connecting Station Wires 7 Connecting Sensors or Flow Meters 8 Connecting to a Wi-Fi Network 9 App Configuration 10

6. 6 HOT ( Black ) NEUTRAL ( White ) GROUND ( Green ) Note: To be performed by a licensed electrician only. Always use UL listed ½" (13 mm) conduit with male adapter when installing AC wiring. Pro-HC controllers are intended to be supplied AC power with an over-current protected device. Improper installation could result in shock or fire hazard. This device is not intended for use by young children. Never let children play with this device.