SHOP NOW. PAY IT IN 4. Always interest-free.

Atlantis Facade-Cell Spec

Brochures & Manuals / Atlantis

0 0
Atlantis Facade-Cell Spec

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. Atlantis ® Facade-Cell ® Part Number 80052F Size Metric (H) 52mm x (W) 264mm x (L) 486tmm Size Imperial (H) 2.04” x (W) 10.40” x (L) 19.13” Part Weight 6 50 grams Weight / m2 5.20 kg/ m 2 (1.06 lb/1 ft 2 ) Flow Rate 2.65 L/sec/m @ 1% gradient Pieces per m 2 (10.76ft 2 ) 8 Ultimate Resistance 155 tonnes/m2 Material 85% Recycled Polypropylene, 15% Atlantis proprietary selected materials Colour Black Void Ratio 90% Biological Resistance Not affected by biological activity. Connecting Clips PRODUCT SPECIFICATION ATLANTIS CORPORATION AUSTRALIA PTY LTD Phone: (02) 9417 8344 Fax: (02) 9417 8311 Email: Web: Note: Atlantis products are manufactured from carefully selected high quality recycled materials. The strength of the recycled plastic could vary slightly due to raw material composition, country of manufacture, manufacturing process and external conditions. All trademarks are the property of Astral Property Pty Ltd. Disclaimer: All information provided in this publication is correct to the best knowledge of the company and is given out in good faith. This information is intended only as a general guide, no responsibility can be accepted for any errors, omissions or incorrect assumption. As each project is unique, and as Atlantis Corporation Australia Pty Ltd and its distributors and agents world wide have no direct control over the methods employed by the user in specifying, installing or supervising of its products hence no responsibility is accepted by Atlantis Corporation Australia Pty Ltd and its distributors and agents world wide. Users should satisfy themselves as to the suitability of the product for their purpose. All product designs, and specification are subject to change without further notice. All Atlantis products are tested in approved laboratories, and safe allowed tolerances should be practised in the actual field, to compensate for any unforeseen situations, on site and on products. All material contained within this brochure is subject to copyright, and belongs to Atlantis Corporation Australia Pty Ltd. No part of this brochure may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of Atlantis Corporation Australia Pty Ltd. Copyright @ 2016 Note: Production specifications are updated on a regular basis. Please contact Atlantis for the latest product specification data sheet. 486 mm (19.13”) 264 mm (10.40”) 52 mm (2.04”) Features notches for interlocking facade piece


  • 3279 Total Views
  • 2492 Website Views
  • 787 Embedded Views


  • 0 Social Shares
  • 0 Dislikes

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 4

  • 2
  • 1
  • 50
  • 1